![background image](http://html1.mh-extra.com/html/olympus/e-m1-mark-iii/e-m1-mark-iii_instruction-manual_4247751082.webp)
82 EN
Shooting
2
Pro Capture Low (
q
)
The camera shoots at up to 18 fps. A maximum of 35 frames can be captured before
the shutter button is pressed all the way down. If [C-AF], [C-AF
b
], [C-AF+TR], or
[C-AF+TR
b
] is selected for [
K
AF Mode] (P. 64), the camera will focus before
each shot. Choose this option if you anticipate that the distance to the subject will
change during shooting.
Pro Capture High (
p
)
The camera shoots at up to 60 fps. A maximum of 35 frames can be captured before
the shutter button is pressed all the way down. The camera will use [S-AF] when
[C-AF] or [C-AF+TR] is selected for [
K
AF Mode] (P. 64) and [S-AF
b
] when
[C-AF
b
] or [C-AF+TR
b
] is selected. Choose this option if the distance to the
subject is unlikely to change very much during shooting.
1
Press the
j
Y#
button.
2
Select
p
(Pro Capture High) or
q
(Pro Capture Low) using the rear dial
and press the
Q
button.
3
Take pictures.
• Capture starts when the shutter button is pressed
halfway. A capture icon (
) will be displayed. If the
button is kept pressed halfway for over a minute,
capture will end and the
Z
icon will clear from the
display. Press the shutter button halfway again to
resume shooting.
• Press the shutter button all the way down to start saving
pictures to the memory card.
• Shooting will continue while the shutter button is
pressed all the way down, up to the number of shots
selected for [Frame Count Limiter].
Capture icon
ISO-A
200
1023
1:02:03
P
S-IS AUTO
S-IS AUTO
250 F5.6 0.0
30p
30p
4K
28
mm
T
W
Y
F
Y
F
100
%
• [Max fps], [Pre-shutter Frames], and [Frame Count Limiter] can be adjusted using the
[
j
L Settings] and [
j
H Settings] options (P. 220) in
G
Custom Menu
N
.
• Selecting
q
(Pro Capture Low) restricts aperture to values between maximum aperture
and f8.0.
• Pro Capture is not available while the camera is connected to a smartphone.
• Four Thirds and third-party Micro Four Thirds lenses cannot be used in
q
(Pro Capture
Low) mode.
• Flickering occurred by fl uorescent lights or the large movement of the subject, etc. may
cause distortions in images.
• During capture, the monitor will not go dark and the sound of the shutter will not be heard.
• The slowest shutter speed is limited.
• Depending on subject brightness and the options selected for [ISO] and exposure
compensation, the display frame rate may drop below that selected for [Frame Rate]
(P. 188) in
G
Custom Menu
Q
.
Summary of Contents for E-M1 Mark III
Page 29: ...29 EN Preparation 1 5 Remove the front lens cap 2 1 1 1 1 2...
Page 332: ......
Page 333: ...WD656900 date of issue 2020 02...