![background image](http://html1.mh-extra.com/html/olympus/e-m1-mark-iii/e-m1-mark-iii_instruction-manual_4247751157.webp)
157
EN
Menu functions (Shooting menu)
4
• Pictures taken with [RAW] for image quality are recorded in RAW + JPEG format.
• The following cannot be used:
live composite photography, burst photography, bracketing, HDR, multiple exposure,
the live ND fi ler, fi sh-eye correction, the digital teleconverter, movie recording, [C-AF],
[C-AF
b
], [C-AF+TR], and [C-AF+TR
b
] AF modes, [e-Portrait] and art fi lter picture
modes, the custom self-timer, and High Res Shot.
• Lens converters may not produced the desired results.
• Be sure to provide [
K
Image Stabilizer] data for lenses that are not part of the Four
Thirds or Micro Four Thirds family (P. 97).
• Where applicable, keystone compensation will be performed using the focal length
supplied for [
K
Image Stabilizer] (P. 97) or [Lens Info Settings] (P. 239).
%
• [Keystone Comp.] can be assigned to a button. You then need only press the button to
enable keystone compensation.
g
“Assigning functions to buttons (Button Function)”
(P. 116)
Setting anti-shock/silent shooting
(Anti-Shock
r
/Silent
s
)
By setting anti-shock (P. 80)/silent shooting (P. 81), you can select anti-shock or
silent shooting when using sequential shooting/self-timer (P. 78).
1
Select [Anti-Shock
r
/Silent
s
] in
X
Shooting Menu 2 and press the
Q
button.
2
Use
FG
to select the item and press
I
.
• Use
FG
to select the setting and press the
Q
button.
Anti-Shock
r
Choose the delay between the shutter button being pressed all the
way down and the shutter being released in anti-shock mode. Use
this mode to suppress small vibrations caused by the operation
of the shutter. Anti-shock mode is available in both sequential
shooting and self-timer modes (P. 78). Select [Off] to disable anti-
shock mode when it is not in use.
Silent
s
Choose the delay between the shutter button being pressed all
the way down and the shutter being released in silent mode. Use
this option in settings in which the sound of the shutter would
be unwelcome. Silent mode supports both the self-timer and
sequential shooting (P. 78). Select [Off] to disable silent mode
when it is not in use.
Noise Reduction
s
Select [Auto] to reduce image “noise” in long exposures during
silent photography. The sound of the shutter may be audible when
noise reduction is active.
Silent
s
Mode
Settings
Choose whether to enable [
8
], [AF Illuminator], or [Flash Mode] in
silent mode.
Select [Allow] to use current settings for the selected item, [Not
Allow] to ignore current settings and disable the selected item.
Summary of Contents for E-M1 Mark III
Page 29: ...29 EN Preparation 1 5 Remove the front lens cap 2 1 1 1 1 2...
Page 332: ......
Page 333: ...WD656900 date of issue 2020 02...