![background image](http://html1.mh-extra.com/html/olympus/e-m1-mark-iii/e-m1-mark-iii_instruction-manual_4247751032.webp)
32 EN
Preparation
1
Turning the camera on
1
Set the
ON/OFF
lever to the
ON
position.
• When the camera is turned on, the monitor will turn on.
• To turn the camera off, return the lever to the
OFF
position.
ON/OFF
lever
Monitor
ISO-A
200
1023
1:02:03
P
S-IS AUTO
S-IS AUTO
250 F5.6 0.0
30p
30p
4K
Y
F
Y
F
100
%
Battery level
The camera displays the level of the battery
currently in use. The battery level is shown in
10 increments.
100
%
Level of current battery (%)
The indicator fl ashes red
when the level reaches 10%.
%
• The
Fn
lever can be confi gured to turn the camera on and off using the [Fn Lever/Power
Lever] option (P. 185) in
G
Custom Menu
J
.
Sleep Mode
If no controls are used for a set period, the camera will automatically enter suspend
operation to reduce the drain on the batteries. This is referred to as “sleep mode”.
• When the camera enters sleep mode, the monitor will turn off and operation will be
suspended. Pressing the shutter or
q
button reactivates the camera.
• If no operations are performed for a set period after the camera enters sleep mode, the
camera will turn off automatically. The camera can be reactivated by turning it on again.
• The camera may require additional time to recover from sleep mode when [On] (enabled)
is selected for [Wi-Fi/Bluetooth Settings] > [Power-off Standby].
g
“Connecting When
the Camera Is Off (Power-off Standby)” (P. 249)
• The delay before the camera goes to sleep or turns off automatically can be selected in
the
G
custom menu. At default settings, the camera will go to sleep after one minute and
turn off automatically after four hours.
g
G
Custom Menu
c
> [Sleep] (P. 199), [Auto
Power Off] (P. 199)
Summary of Contents for E-M1 Mark III
Page 29: ...29 EN Preparation 1 5 Remove the front lens cap 2 1 1 1 1 2...
Page 332: ......
Page 333: ...WD656900 date of issue 2020 02...