258 EN
Connecting the Camera to External Devices
5
Pairing the Computer with the Camera
(New Link)
The camera and computer must be paired in order to connect. Up to four computers
can be paired with the camera at a time. To pair a computer with the camera, connect it
via USB. Pairing need only be performed once per computer.
1
After confi rming that the camera is off, connect it to the computer using the
USB cable.
USB port
USB connector
Small connector
USB cable
• The locations of USB ports vary from computer to computer. See the documentation
provided with the computer for information on USB ports.
2
Turn the camera on.
• The camera will display a message prompting you to identify the device to which the
USB cable is connected.
• If the message is not displayed, select [Auto] for [USB Mode] (P. 190) in
G
Custom
Menu
S
.
• If the batteries are very low, the camera will not display a message when connecting
to a computer. Be sure the batteries are charged.
3
Highlight [
0
] using
FG
on the arrow pad and
press the
Q
button.
100
%
USB
0
MTP
USB PD
PC RAW
Exit
Set
Storage
4
Launch the copy of “OLYMPUS Capture” installed
on the computer.
• After starting up, “OLYMPUS Capture” will prompt you
to choose the connection type.
USB Connection
Wi-Fi Connection
Create new link
Summary of Contents for E-M1 Mark III
Page 29: ...29 EN Preparation 1 5 Remove the front lens cap 2 1 1 1 1 2...
Page 332: ......
Page 333: ...WD656900 date of issue 2020 02...
