■
ATTACHING THE STRAP
1
Pass the short end of the strap through the
strap eyelet.
2
Pass the long end of the strap through the loop.
3
Pull tight and check that the strap is securely
attached.
■
LOADING THE BATTERIES
This camera uses four AA alkaline (included), NiMH, lithium or NiCD batteries,
or two CR-V3 lithium battery packs.
1
Check that the lens barrier is closed and both the monitor and the
green lamp are off.
2
Pull the battery compartment cover
toward
A
and pull up in the direction
of
B
.
3
Insert the batteries as shown, making
sure that they are correctly oriented.
4
Pull down the battery compartment
cover in the direction of
C
and close
firmly by pressing the
mark
in the direction of
D
.
Caution
• If the battery compartment cover is difficult to close, press on the
mark and [OPEN] mark on the cover with your both thumbs without applying
unreasonable force.
• If the camera is left without batteries for about one hour, all the settings will be
reset to the default settings.
• When powering the camera by batteries, if the batteries start to run low, the
red battery status will be displayed. When the batteries are close to exhaustion,
the LCD monitor turns off and the green lamp blinks.
A
B
C
D
Basic02̲C-100̲junbi,E.65J
4/24/01, 3:41 PM
Page 6
Adobe PageMaker 6.5J/PPC
