7
En
Card
insertion mark
➜
➜
➜
■
USING A SMARTMEDIA CARD (OPTIONAL)
A SmartMedia card should be used if you need to store more pictures
than the internal memory can hold. (Please see the chart on the following
page.) SmartMedia is not included with this camera, it must be purchased
separately.
This camera accepts only SmartMedia removable memory. If you insert
a SmartMedia card, the image will be stored on the card and you can
playback the image with the card. If you remove the card from the camera,
the image will be stored on the internal memory and you can playback
the image with the internal memory.
1
Make sure that the camera is turned off.
Close the lens barrier and check that both the monitor and the green
lamp are off.
2
Open the card cover.
3
Insert the SmartMedia card correctly as shown.
There is a mark showing the correct orientation of the card on the inside
of the card cover.
To remove the card, grasp it with your fingertips and pull it out in the
direction shown.
4
Close the card cover until it clicks.
Note
Non-Olympus or non-Lexar cards, or cards formatted on other equipment, such
as a PC, may not be recognized by the camera. Format the card with the camera
before using it. See “Card format/Memory setup” (
p.26).
Caution
• Never open the card cover or remove the SmartMedia card or batteries when
the camera is turned on. The data on the card may be lost, and once lost, it
cannot be restored.
• The SmartMedia card is a precision instrument. Do not subject it to unreasonable
force or impact. Do not touch the gold-colored metal area of the card.
1/Basic02̲C100-E.65J
5/24/01, 4:44 PM
Page 7
Adobe PageMaker 6.5J/PPC
