background image

Pictures cannot be displayed or clearly viewed on the monitor.

Single-frame erase and all-frame erase cannot be performed.

The picture is too dark.

No picture is displayed on the TV when connected to the camera.

154

If you encounter problems

9

Appendix

Possible cause

Corrective action

Ref.

Page

The camera automatically turns off if it is not
operated for a certain period of time. Press the

POWER

switch to turn the camera on.

Set the mode switch to 

.

Adjust the brightness in the SETUP menu’s 

.

The monitor does not function when the AV cable
is connected to the camera.

Set to 

OFF.

Set the video output signal according to the
region where used.
Set the TV to the video input mode.

Hold the camera correctly, keeping your fingers
away from the flash.
Shoot within the flash working range.

Select a different flash mode (not flash off 

).

Set the flash to fill-in mode 

, or set ESP/

to 

.

Select BEACH & SNOW in the SCENE SELECT
menu or adjust the exposure compensation
toward plus (+).

If the center of the subject is too bright, the
image as a whole emerges darker. Adjust the
exposure compensation toward plus (+).

The power is off.

The camera is in the
shooting mode.
The brightness is not
adjusted properly.
The camera is connected
to a TV.

The images are protected.

The video output signal is
incorrect.
The TV video signal
setting is incorrect.

The flash was blocked by
your finger.
The subject was out of the
working range of the flash.
The flash was set to the
flash off mode 

.

The subject was too small
and was backlit.
Bright (white) subjects
(such as snow) come out
darker than their natural
colors.
The center of the subject
was too bright.

P. 10

P. 96

P. 77

P. 78

P. 99

P. 53

P. 52

P. 52
P. 55
P. 38
P. 56

P. 56

Summary of Contents for CAMEDIA AZ-2 ZOOM


















































































































































































Reviews: