![background image](http://html.mh-extra.com/html/olympus/camedia-az-2-zoom/camedia-az-2-zoom_advanced-manual_733947053.webp)
53
Flash
4
Ho
w to optimiz
e y
our settings bef
ore shooting
In the
mode, select FLASH
MODE in the top menu, then select
the flash mode.
~
“How to use the
menu” (P. 17)
Press the shutter button halfway.
Press the shutter
button all the way
down (fully) to
take the picture.
Flash working range
W (max.) : Approx. 0.3 m - 2.2 m
(1.0 ft - 7.2 ft)
T (max.) : Approx. 0.3 m - 1.3 m
(1.0 ft - 4.3 ft)
HQ
HQ 2288 1712
P
The icon of the
selected flash
mode
The
(flash stand-by) mark lights
when the flash is ready to fire. If the
mark is blinking, the flash is
charging. Wait until charging is
complete.
Half press
Full press
●
When using a situation-related shooting mode (
~
P. 34), the flash may not
be used.
●
The flash cannot be used during sequential shooting (
~
P. 43), super
macro shooting (
~
P. 41) or movie recording (
~
P. 47).
●
When there is a likelihood that camera movement will occur in the flash off
mode, the
(camera movement warning) mark blinks. Use the flash.
Red-eye reduction flash
(
)
●
After the pre-flash, it takes approximately 1 second before the shutter is
released. Hold the camera firmly after the pre-flash to prevent camera
movement.
●
Effectiveness may be limited if the subject is not looking directly at the pre-
flashes, or if the shooting range is too far. Individual physical characteristics
may also limit effectiveness.
Fill-in flash
(
)
●
Fill-in flash may not have the desired effect under excessively bright light.
Flash off
(
)
●
Since a slow shutter speed is automatically selected in low-light situations in
the flash off mode, it is recommended that you stabilize the camera to
prevent your pictures from being blurred by camera movement.
Note
Shutter button
Joystick
Summary of Contents for CAMEDIA AZ-2 ZOOM
