Olympus CAMEDIA AZ-2 ZOOM Advanced Manual Download Page 150

Page: 150 / 177

If you encounter problems

150

Appendix

Y/M/D

Possible cause

The first time the

camera is used or

when it is left with the

battery removed for a

long time, the default

date and time setting

are restored.

The card is not

inserted, or it cannot

be recognized.

There is a problem

with the card.

Writing to the card is

prohibited.

The card is full. No

more pictures, movies

or information such as

print reservations can

be recorded.

There are no pictures

on the card.

There is a problem

with the selected

image and it cannot

be played back on this

camera.

Corrective action

Set the date and time.

Insert a card or insert a different card. If

the problem persists, format the card. If

the card cannot be formatted, it cannot be

used.

Use a different card. Insert a new card.

The recorded image has been protected

(read-only) on a PC. Download the image

to a PC and cancel the read-only setting.

Replace the card or erase unwanted

pictures. Before erasing, download

important images to a PC.

The card contains no pictures. Record

pictures.

Use image processing software to view

the image on a PC. If that cannot be

done, the image file is damaged.

Monitor

indication

NO CARD

CARD ERROR

CARD FULL

NO PICTURE

PICTURE ERROR

WRITE PROTECT

Error codes

Summary of Contents for CAMEDIA AZ-2 ZOOM


















































































































































































Search results

Summary of Contents for CAMEDIA AZ-2 ZOOM

Reviews:

Related manuals for CAMEDIA AZ-2 ZOOM

Brands by name

Popular brands

Olympus CAMEDIA AZ-2 ZOOM, Advanced Manual

Search results

Summary of Contents for CAMEDIA AZ-2 ZOOM

Reviews:

Related manuals for CAMEDIA AZ-2 ZOOM

Brands by name

Popular brands