![background image](http://html.mh-extra.com/html/olympus/camedia-az-2-zoom/camedia-az-2-zoom_advanced-manual_733947069.webp)
69
5
Pla
ybac
k
Adding sound to recorded images
Sound can be added to a still image that you have already shot. You can also re-
record over the sound that has already been recorded. Recording time per image
is approximately 4 seconds.
Play back the image you want to add
sound to.
~
“Single-frame playback” (P. 60)
In the top menu, select MODE MENU
T
PLAY
T
.
~
“How to use the menus” (P. 17)
START
EDIT
PLAY
CARD
SET
Point the camera microphone at the
target and start recording.
Microphone
Joystick
●
To obtain the optimum sound, the microphone should be placed no farther
than 1 m (3.3 ft.) away from the subject.
●
If you re-record the sound, the original sound is erased.
●
Sound may not be recorded if there is insufficient card memory available
(the CARD FULL message is displayed).
●
Sound recording may pick up camera noises, such as button operation.
●
Once sound has been added to an image, it is not possible to erase the
sound only. In this case, make a re-recording without sound.
Note
Summary of Contents for CAMEDIA AZ-2 ZOOM
