background image

6

Customizing the settings/functions of y

our camera

106

Do not perform any of the following actions during formatting as they may
render the card unusable:
– Open the battery/card compartment cover.
– Remove the battery.
– Disconnect or connect the AC adapter. Never do this regardless of whether

or not the battery is loaded in the camera.

Note

BUSY

In the top menu, select MODE MENU

T

CARD 

T

FORMAT.

~

“How to use the menus” (P. 17)

Select YES.

FORMAT — Formatting the card

FORMAT

YES

CAUTION ERASING ALL

NO

SELECT

GO

OK

Displayed when formatting is in
progress.

Lets you format a card. Formatting prepares cards to receive data.
Non-Olympus cards or cards formatted on a computer must be formatted with the
camera before they can be used.

All data stored on the card, including protected images, is erased when the
card is formatted. When formatting a used card, confirm there are no images
that you still want to keep on the card.

Available modes

Joystick

Summary of Contents for CAMEDIA AZ-2 ZOOM


















































































































































































Reviews: