BX-RLAA
28
Preparation for Mounting the Motorized Revolving Nosepiece (Fig. 14)
}With certain motorized revolving nosepiece series, the connector of the
BX-RLAA reflected light illuminator should be unlocked before operation.
U-D6REM/5BDREM
The connector can be connected by mounting the revolving nosepiece in
the same way as manual revolving nosepiece.
For the connection of the motorized revolving nosepiece, be sure to insert
the motorized revolving nosepiece al the way until it is stopped.
U-D6REMC/D6BDREMC/D5BDREMC/P5BDREMC/P5REMC
The connector is unlocked by removing the screw @ fixed at the factory
using a Phillips screwdriver. Then the revolving nosepiece can be attached
in the same way as above.
To lock the connector again:
Attach the motorized revolving nosepiece on the illuminator and tighten
the screws @.
In this case, the illuminator is incompatible with other motorized revolving
nosepieces so it may become capable of being connected only with the
combined motorized revolving nosepiece.
Fig. 14
@
