BX-RLAA
12
STAGE FOR METALLURGICAL SPECIMENS
}To improve the ease of operation, it is recommended to use a stage for exclusive use with metallurgical specimens or
replace the biological specimen holder with that for metallurgical use.
1
Placing the Specimen
}The maximum load capacities are as follows.
· Stage:
1.5 kg
· Stage plate
500 g (U-SVRM/SVLM)
1 kg (U-SIC4R2/SIC4L2)
# If a specimen heavier than the specified weight is placed, phenom-
ena such as deterioration of the feeling of stage movement and parts
wear may occur.
With the U-MSSP or U-MSSP4 Stage Plate
Place the specimen on the stage plate @.
}The specimen should be parallel and planar. Otherwise, the reflected light
cannot reach the objective, rendering observation impossible.
}When observing very large specimens, remove the stage plate and place
the specimen directly on the stage.
Fig. 7
@
