Olympia Protect 9 Series, Operating Manual

Page: 29 / 40

Monitoring Functions
G
29
depends on the type of alarm set and the setting de­
fined in the
Flood & Smoke menu option.
If an outdoor siren is registered on the base unit, the
alarm can only be stopped by the remote control unit
after 15 seconds at the soonest.
Alarm Mode
You should activate Alarm mode when you leave your
apartment or house. Before doing so, check that all the
doors and windows provided with a door/window contact
are closed.
You can activate the required alarm type on the base unit
or via the remote control supplied as follows:
Base Unit
1. Enter your PIN. Confirm it by pressing .
2. Press the button.
Remote Control
1. Press the button.
At Home Mode
During the night, before you go to sleep, you should acti­
vate At Home mode. Before doing so, check that all the
doors and windows are closed.
You can activate the required alarm type on the base unit
or via the remote control supplied as follows.
Base Unit
1. Enter your PIN. Confirm it by pressing .
2. Press the button.
Remote Control
1. Press the button.
PIR At Home Mode
Using the optional PIR At Home mode, the alarm caused
by the motion detectors in At Home mode is deactivated.
This mode can only be activated on the base unit.
When PIR At Home mode is activated, the motion de­
tectors registered on the base unit are deactivated in At
Home mode. This means that false alarms caused by
unavoidable movements within the area monitored (by
residents, pets, etc.) can be prevented.
1. Enter your PIN. Confirm it by pressing .
2. Press to open the menu.
3. Select the PIR Home Mode menu option.
Confirm it by pressing .
4. Use the and buttons to switch the func­
tion On or Off . Confirm it by pressing .