Olympia Protect 9 Series, Operating Manual

Page: 19 / 40

Configuration
G
19
For reasons of security, we recommend that you
change the predefined PIN and enter your own personal
PIN.
1. Enter the predefined PIN.
Confirm it by pressing .
2. Press to open the menu.
3. Select the Entry Code menu option. Confirm it by
pressing . The predefined PIN appears in the
display. The first digit flashes. Enter your own personal,
4-digit PIN. Confirm it by pressing
.
Note down your new PIN and keep it where it cannot be
accessed by third-parties.
Key Lock
Before beginning to operate the base unit, deactivate the
key lock function.
1. Enter your PIN.
Confirm it by pressing .
The key lock is reactivated automatically when no buttons
are pressed for a period of 10 seconds.
You can also activate the key lock function manually by
pressing the
button.
The SOS and Panic buttons are excluded from the key
lock function and are always functional!
Time for Automatic Key Lock
You can define the period of time which should elapse be­
fore the key lock is automatically activated when you do not
operate the base unit.
You set a delay of between 20 and 40 seconds.
When the default setting is set, the key lock is activated
after
20 seconds .
1. Enter your PIN.
Confirm it by pressing .
2. Press to open the menu.
3. Select the KeyLock Delay menu option.
Confirm it by pressing .
4. Set the delay time 20S - 40S using the and
buttons. Confirm it by pressing .
Individual Outgoing Messages
An individual outgoing message can be recorded for
each sensor (door/window contact, smoke detector,
etc.). The standard message is replaced by your individ­
ual voice message and played when the GSM dialling
unit is activated!
Proceed as follows to record an individual messages for
each respective sensor:
1. Enter your PIN.
Confirm it by pressing .
2. Press to open the menu.