Olympia Protect 9 Series, Operating Manual

Page: 10 / 40

Installation
G
10
Information on Selecting the Installation Location
Do not place the base unit on or in the direct vicinity of
large metallic objects or electrical sources of interference
which could impair the function of the base unit. Examples
of sources of interference include radiators, concrete steel
walls, metal doors, loudspeaker systems, motors and other
unshielded electronic devices.
• Position the base unit as centrally as possible in the
area to be monitored to ensure optimum radio transmis­
sion of all components.
• Position the base unit near a properly installed power
socket (230 V / 50 Hz).
• Position the base unit and alarm system components in
such a way that a distance of at least 20 cm is main­
tained to you and/or other persons. This is a useful way
of reducing any exposure to radio waves.
• Position the base unit in an area which, when accessed,
triggers the alarm. This prevents intruders being able to
approach the base unit and manipulate it.
Preparing and Connecting the Base Unit
1. Use a screwdriver to loosen the screw in the battery and
connection socket compartment on the underside of the
base unit.
2. Remove the cover from the battery and connection
socket compartment.
LOCK
OPEN
LOCK
OPEN
A B
C
3. Slide the SIM card holder to the left to unlock it (A).
4. Pivot the holder up and insert the SIM card in the hold­
er (B).
5. Pivot the holder with the SIM card back and slide the
holder to the right to lock it (C).
6. Insert three batteries in the battery compartment (pay
attention to correct polarity).