background image

Registering and Deregistering Sensors / System Extention

Giu

OPERATING

INSTRUCTIONS

27

Page

Registering Sensors

Up to 32 sensors can be registered on the wireless alarm system.

If you purchase optionally available sensors, such as additional remote
controls, smoke detectors etc., they must be registered manually.

Proceed as follows to register the sensors:

1. Enter the Entry Code. Confirm it by pressing 

.

2. Press the 

 button to open the menu. Use the 

 and

 

buttons to select the 

Register

 menu option. Confirm it by

pressing 

.

3.

Search…

 appears in the display

4. Activate the sensor to be registered. To do this, please refer to the

description supplied with the sensor.

5.

Open Sensor01

 or 

SmokeSensor01

 

appears in the display.

 

You can

rename the sensor, if necessary. Confirm it by pressing 

.

6.

Voice Record

 appears in the display. Press 

 to retain the

standard message or press 

 to record an individual message.

7. Confirm it by pressing 

.

NOTE:

If you do not confirm by pressing the 

button, recording is automatically ended after
10 seconds.

8. Your individual message is played back. The main menu reappears

in the display.

Deregistering Sensors

1. Enter the Entry Code. Confirm it by pressing 

.

2. Press the 

 button. 

Review

 appears in the display.

3. Press the buttons 

 and 

 to select the sensor to be

deregistered.

4. Press the 

 button. 

Delete?

 appears in the display.

5. Confirm it by pressing 

Empty

 appears in the display.

6. Press the 

 button twice to exit from the menu.

System Extension

You can order accessories and options for the wireless alarm system via
the following web site

www.olympia-vertrieb.de

Products

Security Products

Wireless Alarm Systems

Summary of Contents for Protect 6XXX Series





































Reviews: