Monitoring Functions
Giu
OPERATING
INSTRUCTIONS
23
Page
You can define the required type of alarm as follows using either the base
unit or the remote control unit supplied:
NOTE:
If an outdoor siren is registered on the base
unit, the alarm can only be stopped by the re
mote control unit after 15 seconds at the earli
est.
Alarm Mode
NOTE:
You should activate Alarm mode when you
leave your apartment or house. Before doing
so, check that all the doors and windows
provided with a door/window contact are
closed.
Base unit
1. Enter the device-specific Entry Code. Confirm it by pressing
.
2. Press the
button.
Remote control
1. Press the
button.
At Home Mode
NOTE:
During the night, when you are asleep, you
should activate At Home mode. Before doing
so, check that all the doors and windows are
closed.
Base unit
1. Enter the device-specific Entry Code. Confirm it by pressing
.
2. Press the
button.
Remote control
1. Press the
button.
Silent Mode
NOTE:
When you leave your apartment or house, you
can activate Silent mode instead of Alarm
mode. Before doing so, check that all the doors
and windows are closed.
Base unit
1. Enter the device-specific Entry Code. Confirm it by pressing
.
2. Press the
button.
Remote control
1. Press the
and
buttons simultaneously.
