Olympia Protect 6XXX Series, Instruction Manual

Page: 16 / 36

Configuration
OPERATING
INSTRUCTIONS
Giu
16 Page
Setting the Date/Time
1. Enter the device-specific Entry Code. Confirm it by pressing .
2. The menu is opened by pressing the Menu button briefly.
3. Select the Date/Time menu option. Confirm it by pressing .
4. Display: 01-01-2010 .
5. Use the keypad on the base unit to enter the day, month and year.
Confirm it by pressing .
6. Display: 00:00 .
7. Enter the time as hour and minute.
8. Confirm it by pressing
. The main menu reappears in the
display.
9. Press to exit from the menu.
Individual Outgoing Messages
NOTE: You can record an individual message of up to
max. 10 seconds for each sensor (door/window
contact, smoke detector). The standard mes­
sage is replaced by your individual voice mes­
sage and played when the telephone dialling
unit is activated!
Proceed as follows to record an individual messages for each respective
sensor:
1. Enter the device-specific Entry Code. Confirm it by pressing .
2. The menu is opened by pressing the Menu button briefly.
3. Select the Review menu option. Confirm it by pressing .
4. Select the respective sensor required by pressing the and
buttons. Confirm it by pressing .
5. The first letter of the sensor selected flashes. You can rename the
sensor (e.g. BalconyDoor, KitchenWindow,, etc.). Confirm it by press­
ing
.
6. Text or numbers which have been entered can be deleted by press­
ing the button.
7. Voice Record appears in the display. Confirm it by pressing
.
8. Speak your individual voice message for the selected sensor into the
unit (e.g. BalconyDoor).
9. Press the button to confirm the message and end recording.
NOTE: If you do not confirm by pressing the
button, recording is automatically ended after
10 seconds.
10. Your individual message is played back. The main menu reappears
in the display.
11. Press to exit from the menu.