Monitoring Functions
OPERATING
INSTRUCTIONS
Giu
24
Page
Disarmed Mode
NOTE:
When the system is disarmed, you can move
freely within the living quarters without trigger
ing any alarms.
Base unit
1. Enter the device-specific Entry Code. Confirm it by pressing
.
Remote control
1. Press the
button.
Panic Alarm
You can activate a panic alarm as a deterrent by pressing the
button on the base unit or the
button on the remote control unit, de
pending on the configuration. The panic alarm is triggered immediately
without any delay.
To switch off the panic alarm, enter your 4-digit Entry Code on the base
unit. Confirm it by pressing
.Or, you can press the
button on
the remote control.
Emergency Call (SOS)
You can trigger the SOS (emergency call) function by pressing the
button on the base unit or the
button on the remote control unit, de
pending on the configuration. The internal telephone dialling unit is auto
matically activated when phone numbers have been stored. The emer
gency call number is dialled first, then up to 10 stored phone numbers in
succession . A voice message requests the subscriber called to press the
[1]
button on their phone/mobile. The handsfree function is automatically
activated and enables communication between the caller and subscriber
called.
There are three ways to end the SOS function:
a) Enter your 4-digit Entry Code on the base unit and confirm it
by pressing the
button.
b) Press the
button on the remote control.
c) The subscriber called takes the call, executes a function with
in 24 seconds (refer to "Activating the Internal Telephone
Dialling Unit with OGM Function") and then ends the call.
