Olympia Omega 1638, User Manual, Page: 31 / 32

Appendix 7
7-1
7 Appendix
7.1 Product Specifications
* Auto IP is a function that allows the Network Interface Card to automatically assign IP
addresses that begin with 169.254 and use a subnet mask setting of 255.255.0.0. If there
are two or more devices on the same network that use Auto IP, these devices can
communicate with each other.
7.2 Troubleshooting
Please check the following checklist if you have problems using the copier
as a network printer.
Interface Ethernet 10/100Base-T /TX (RJ-45)
TCP/IP Services ARP, BootP, DHCP, lpr/lpd, Raw Socket, AutoIP*
Checkpoint Possible cause Solution
1 Has the print job
reached the copier? Yes A copier error has
occurred. (No paper,
no toner, etc.) Check the copier and
resolve any errors.
No The data has not
arrived at the copier. See checkpoint 2.
2 Does the computer
respond when a Ping
test is sent to the
controller? Yes The port number
setting is wrong. Correct the port
number setting.
A computer
malfunction. Restart the computer.
The driver has not
been installed
correctly. Uninstall the driver
software, then reinstall
it according to the
instructions.
No A copier malfunction. Restart the copier.
The network cable has
become disconnected
or there is a problem
with the hub. Reconnect the cable
and restart or replace
the hub.
The IP address or
subnet mask setting is
wrong. Correct the IP address
and subnet mask
setting.