Olympia Omega 1638, User Manual, Page: 20 / 32

4 Assigning an IP Address
4-4
8
Use the 10-key pad or and to
enter the Subnet Mask address.
Note
The Subnet Mask address shown in the illustration is only an
example. Always check with your network administrator before
entering a subnet mask.
9
Press the [Yes] key to confirm the setting. “The NETWORK
SETTING?” menu appears again.
H Proceed to enter the Default Gateway setting.
10
While the “NETWORK SETTING?”
menu is displayed, press [3] on the
10-key pad to select “GATEWAY”.
11
Use the 10-key pad or and to
enter the Default Gateway address.
Note
The Default Gateway address shown in the illustration is only an
example. Always check with your network administrator before
entering a default geteway address.
12
Press the [Yes] key to confirm the setting.
H The “NETWORK SETTING?” menu appears again. Finally, the
specified IP address, network mask, and default gateway settings
are registered on the copier itself. In order to register these
settings, the copier must be restarted by turning it OFF/ON.
13
While the “NETWORK SETTING?” menu is displayed, press [No] or
[Panel Reset] to select “PLEASE RE-START POWER SUPPLY OFF/
ON”.
14
Press the main power switch for the copier OFF/ON to restart the
copier.