Olympia Omega 1638, User Manual

Page: 25 / 32

Connecting the Computer and Copier 6
6-3
6.2.2 LPR Printing
Windows 2000/ Windows XP
Important
Before continuing to setup the network settings, please check the
following:
Check that the computer is setup to use the TCP/IP protocol.
Check that the copier is also setup to use the TCP/IP protocol.
Check that printer driver has been installed on the computer.
(For instructions on installing the GDI driver, refer to “GDI Printer
Controller” in the manual provided with the copier. For instructions on
installing the optional PCL driver, refer to “PCL Printer Controller” in
the manual provided with PCL printer controller.)
1
When using Windows 2000, click [Start] - [Settings] - [Printers] to open
the “Printers” folder.
When using Windows XP, click [Start] - [Control Panel] - [Printers and
Other Hardware] - [See a list of installed printers and fax printers.] to
open the “Printers and Faxes” folder.
2
Right-click on the icon for the installed printer driver.
3
Click [Properties] to open the Properties dialog box.
4
Display the “Ports” sheet, then click [Add Port].
5
From the “Printer Port” dialog box, select Standard TCP/IP Port , then
click [New Port].
6
When the Add Standard TCP/IP Printer Port wizard appears, click
[Next>].
7
Enter the IP address for the copier into Printer Name or IP Address ,
then click [Next>].
8
Select the checkbox for Custom , then click [Settings].
9
Select the checkbox for LPR in Protocol, then enter the name of the
print queue in the Queue Name box (Example: print), then click [OK].