![background image](http://html1.mh-extra.com/html/olympia/omega-1638/omega-1638_user-manual_3890548019.webp)
Assigning an IP Address
4
Check with your network administrator that there is a DHCP server
available on the network. (If this is the case, a special IP address
will be assigned by the AutoIP function. However, the copier will
not be able to communicate with other devices on the network that
have had ordinary IP addresses assigned to them. For details
about the AutoIP function, refer to 9.1 Product Specifications.)
Always select “SPECIFY” when there is no DHCP server available.
When “AUTO” is selected to assign the IP address, the IP address
may sometimes be changed automatically. If the IP address and
other settings are changed, you may not be able to print to a
specified printer on the network due to a communication failure
caused by the change in number. When “AUTO” is selected, we
recommend that you set the DHCP server to assign a fixed
address to the copier.
5
Use the 10-key pad or
and
to
enter the IP address.
Note
If an IP address is already entered, it can be overwritten by a new
one.
The IP address shown in the illustration is only an example. Always
check with your network administrator before entering an IP
address for the printer.
6
Press the [Yes] key to confirm the setting. “The NETWORK
SETTING?” menu appears again.
H
Proceed to enter the Subnet Mask setting.
7
While the “NETWORK SETTING?”
menu is displayed, press [2] on the
10-key pad to select “SUBNET
MASK”.
Summary of Contents for Omega 1638
