Olympia Omega 1630f, User Manual

Page: 33 / 53

Connecting the Computer and Copier 7
7-3
7.2.2 LPR Printing
Windows 2000
Important
Before continuing to set up the network settings, check the following:
Check that the computer is set up to use the TCP/IP protocol.
Check that the copier is also set up to use the TCP/IP protocol.
Check that the printer driver has been installed on the computer.
(For details on installing the printer driver, refer to “PCL PRINTER
CONTROLLER” or “GDI PRINTER CONTROLLER” in the manual
provided with the copier.)
1
Click [Start] - [Settings] - [Printers] to open the “Printers” folder.
2
Right-click the icon for the installed printer driver.
3
Click [Properties] to open the Properties dialog box.
4
Click the “Ports” tab, and then click [Add Port].
5
In the Printer Ports dialog box, select Standard TCP/IP Port , and then
click [New Port].
6
When the Add Standard TCP/IP Printer Port Wizard appears, click
[Next>].
7
Enter the IP address for the copier into the Printer Name or IP
Address box, and then click [Next>].
8
Select Custom , and then click [Settings].
9
Select LPR in the Protocol group box, enter the name of the print
queue in the Queue Name box. (for example: “print”), and then click
[OK].
Note
Use half-pitch characters to enter the queue name.
10
Click [Next>].