Olympia Omega 1630f, User Manual

Page: 20 / 53

2 Getting Ready
2-10
NetWare Server/Client (except NDPS)
1
Check that all of the accessories have been included in the package.
(“3 Checking the Accessories”)
2
Connect the network cable. (“4 Connecting the Network Cable”)
3
Specify the settings that enable the copier to connect to the NetWare
server. (“7 Connecting the Computer and Copier”)
4
Set up the NetWare client so that it can print via the NetWare server.
(“7 Connecting the Computer and Copier”)
NetWare Server/Client (NDPS)
1
Check that all of the accessories have been included in the package.
(“3 Checking the Accessories”)
2
Connect the network cable. (“4 Connecting the Network Cable”)
3
Specify the IP address, subnet mask, and default gateway settings.
(“5 Assigning an IP Address”)
4
Print the Configuration Page and check the settings. (“6 Printing the
Configuration Page”)
Note
The Configuration Page cannot be printed for copiers that are not
equipped with the fax function.
5
Specify the settings that enable the copier to connect to the NetWare
server. (“7 Connecting the Computer and Copier”)
6
Set up the NetWare client so that it can print via the NetWare server.
(“7 Connecting the Computer and Copier”)