Olympia Omega 1630f, User Manual

Page: 17 / 53

Getting Ready 2
2-7
2.2 Checking the Setup Procedures
This section describes the required procedures for setting up network
printing for the selected network print method.
Peer-to-Peer Printing
1
Check that all of the accessories have been included in the package.
(“3 Checking the Accessories”)
2
Connect the network cable. (“4 Connecting the Network Cable”)
3
Specify the IP address, subnet mask, and default gateway settings for
the copier. (“5 Assigning an IP Address”)
4
Print the Configuration Page and check the settings. (“6 Printing the
Configuration Page”)
Note
The Configuration Page cannot be printed for copiers that are not
equipped with the fax function.
5
Install the printer driver. The Peer-to-Peer Utility is installed when you
install the printer driver.
H For details on installing the printer driver, refer to “PCL PRINTER
CONTROLLER” or “GDI PRINTER CONTROLLER” in the manual
provided with the copier.
6
Add a network port to the computer. (“7 Connecting the Computer and
Copier”)