![background image](http://html1.mh-extra.com/html/olympia/muria/muria_user-manual_3875426009.webp)
When installing the hot water distribution, relevant regulations resulting from the following
standards must be complied with:
ČSN 06 0320 – Service water heating, designing and planning.
ČSN 06 0830 – Security and surveillance systems for central heating and service water heating.
We recommend you to contact a specialist heating firm at your place of residence to make the
installation. When the stove is put into operation, connect the exchanger to the heating system as
soon as possible.
11.1 General precautions against the overheating of the exchanger with a pump during
power supply interruption:
Emergency power supply.
Connect an automatic circulation thermal load (min. 30% of the exchanger output, e.g. a
storage tank or a boiler) to the system. Connect this circuit manually or by a thermovalve.
Flush the exchanger from the water main connected through the thermovalve.We hope that we
have given you some useful advice for perfect and safe operation. We wish you a lot of pleasure,
cosy warmth and nice time spent in front of your fireplace stove.
The manufacturer confirms that this product has obtained a ,,Declaration of Conformity”
according to the law, following the subsequent statutory text, and this declaration is stored at
the Business Department of the company. Due to continuous product development, the
manufacturer also reserves the right to make small innovation changes of the products without
prior notice.
Summary of Contents for muria
Page 1: ...MANUAL OLYMPIA MURIA...