Stove storage and operation must be ensured in a dry area
, as the fireproof colour is not
moisture resistant. Stove cleaning (except the glass) is performed without the use of water
cleaning agents, e.g. by vacuuming or brushing. Any modifications of the appliance are
inadmissible. Only use manufacturer approved spare parts.For tile stoves, the tiles must not be
cleaned with a wet cloth; use a slightly damp cloth and perform cleaning only if the stove is cold.
Lubricate the abrasive surfaces of the door hinges and the closing mechanism with
carbon fat or high-temperature lubricant at regular intervals.
8. Heating capability
The heating capability is given in the table below. It means the capability to heat a specific space
volume to 24°C with regard to the building construction and the stove installation site under
normal climatic conditions and at the rated stove output. The heating capability may be up to 25 %
lower at extreme frosts or in badly insulated buildings. The data given in the table are only for your
guidance. Actual heat loss of the appartment are valid !
9. Service and installation organizations
Eventual service or guarantee repairs will by provided by the manufacturer, either directly or via
the vendor, after receiving a written statement of the reasons for warranty claim.
10. Package and scrapped product disposal
In accordance with the law and related regulations we recommend the following procedure for
package and scrapped product disposal.
Package:
a) use the wooden parts for heating
b) put the plastic package into a waste container
c) deliver the screws and holders to the junk yard
d) put the bag with humidity absorber to separated waste
Scrapped product:
a) demount the glass and put it into a separated waste container
b) put the sealing and fireclay plates to municipal waste
c) deliver the metal parts to the junk yard
11. Installing the hot water distribution (only for the stove with a
hot water exchanger)
Summary of Contents for muria
Page 1: ...MANUAL OLYMPIA MURIA...
