25
B
Fine Adjustment of the Folding Style
Note:
Please pay attention to the table below.
13
Insert the handwheel (11) in the hole (12) provided on the left-hand
side of the machine (2).
Note:
The handwheel (11) is located under the machine.
14
Turn the handwheel (11) to feed a sheet of paper.
15
Loosen the knurled screws (9) in the stops (10) on the folding
plates (8).
16
Slide the stops (10) on the folding plates (8) in short steps in order to
be able to determine the correct position accurately.
17
Check the position of the stops (10) by means of the manually fed
sheet of paper.
18
Repeat the process until the setting for the folding style is correct.
19
Fix the stops (10) on the folding plates (8) using the knurled
screws (9).
Note:
The following table provides information on the various
alignment errors of the stops (10) on the folding plates (8). The
graphics provide a general orientation. Designations "A" and "B"
define the adjustable lengths. The arrows indicated the direction of
adjustment.
Misalignment
Folding style
Move the stop (10) according to the direction arrow
in the graphic.
If A is too long.
If A is too short.
If B is too long.
If B is too short.
Fanfold
