24
B
Setting the Folding Style
The folding machine is equipped so that you can select between various
styles of fold. Refer to the table below for the folding styles available for
selection.
10
Loosen the knurled screws (9) in the stops (10) on the folding
plates (8).
11
Position the stops (10) on the two folding plates (8) according to the
folding style you require.
Note:
When positioning the stops (10), pay attention to the table in
respect of the various folding styles. The correct adjustment of the
folding plates (8) can be seen according to the labels. These are
provided both in the table as well as on the folding plates (8), in each
of the respective sizes, namely A4 and Letter/Legal. Please refer to
the table for the different combinations of labels which are required for
the respective folding styles.
12
Fix the stops (10) on the folding plates (8) using the knurled
screws (9).
A4
(297 x 210 mm)
Letter/Legal
(279 x 216 mm)
Folding style
Front
folding
plate (8.1)
Rear
folding
plate (8.2)
Front
folding
plate (8.1)
Rear
folding
plate (8.2)
Fanfold
Z fold
Double fold
Single fold
Reverse
Reverse
