![background image](http://html.mh-extra.com/html/olympia/carrera-de-luxe-md/carrera-de-luxe-md_service-manual_732750072.webp)
8. Troubleshooting
Symptoms
Possible Cause
Solution
Ref. in Manual
1. Power supply
Even though the power is on,
the typewriter does not operate
and the LED does not light.
* Either the power supply cord
is not plugged in properly, or
the connector (CN201) is not
connected.
Plug in the
cord or
connect the
connector.
3.1, 5.7
* The power switch or
transformer has failed.
Replace. 3.1,
5.7
* The fuse (F201) is blown.
Replace.
3.1, 3.6, 5.2
* The control PCB has failed. Replace.
3.6, 5.2
* The LED or connectors
(CN208 and CN209) has
failed.
Replace.
3.2, 3.6, 5.2
* The ROM (control PCB:
999-32300) is not installed.
Install the
ROM.
3.6, 5.2
2. Initial operation
* The connector (CN202 -
CN210) is not connected.
Connect the
connector.
3.2-3.6, 5.2
When the power is first turned
on, the typewriter does not
perform the initial operations.
* The motor has failed.
Replace.
3.3, 5.4, 5.6
* The LCD cable is not
connected.
Connect the
connector.
3.5, 3.6, 5.1,
5.2
* The LCD has failed.
Replace.
3.5, 5.1, 5.2
* IC (CPU, ROM, gate array,
etc.) or Reset IC has failed.
Replace. 3.6,
5.2
* The control PCB has failed. Replace.
3.6, 5.2
3. Beeper
The beeper does not sound.
* The beeper (BZ201) has
failed.
Replace. 3.6,
5.2
* IC (CPU, ROM, gate array,
etc.) or Reset IC has failed.
Replace. 3.6,
5.2
* The control PCB has failed. Replace.
3.6, 5.2
4. Carrier
The carrier does not move or is
out of adjustment.
* The connector (CN204) is not
connected.
Connect the
connector.
3.3, 3.6, 5.4
* The carrier motor has failed. Replace.
3.3, 5.4
* IC (CPU, ROM, gate array,
etc.) or TRA201 has failed.
Replace. 3.6,
5.2
* The control PCB has failed. Replace.
3.6, 5.2
* The carrier belt tension may
be improperly adjusted.
Adjust the
carrier belt
tension.
4.4.6, 5.4
* The belt tension/carrier motor
spring has failed.
Reassemble
or replace.
4.4.6, 5.4
* The adjustment screw may
not be adjusted properly, or
the left end switch has failed.
Adjust or
replace.
3.4, 4.4.1, 5.4,
5.6
8-1
Summary of Contents for Carrera De Luxe MD
