![background image](http://html.mh-extra.com/html/olympia/carrera-de-luxe-md/carrera-de-luxe-md_service-manual_732750057.webp)
18) Do not remove the cassette holding spring (37) unless necessary, as removing and reinstalling it
will make it loose.
Reassembly
Reverse the procedure described on the previous page.
Fix the ratchet hook (3) in place roughly at the center of the oval hole. With the ribbon cassette
base (6) up as high as it will go, engage the hook on the ribbon cassette base (6) and the ratchet
hook (3) approximately half way with the teeth on the correct feed ratchet gear (11).
Hand-tighten the lift slide plate (16) and the rail slide (36) at approximately the center of the oval
hole. Because the carrier box is an assembly, be aware that repeated re-attachment of the gear
holding base (19), etc., will cause the screws to lose their gripping ability.
If the drive ratchets (23) are re-attached with the wrong orientation, the correct cam (8) and the
drive bevel gear (25) will turn in either direction. In this case, reverse the orientation of the drive
ratchets and then attach the ribbon drive gear (24).
Readjustment
Ribbon tape position adjustment will be necessary. (Refer to 4.4.5 "Correction Tape Lift and
Ribbon Tape Position Adjustment".)
Correction tape lift adjustment will be necessary. (Refer to 4.4.5 "Correction Tape Lift and Ribbon
Tape Position Adjustment".)
Rail slide position adjustment will be necessary. (Refer to 4.4.4 "Carrier and Platen Position
Adjustment".)
5-18
Summary of Contents for Carrera De Luxe MD
