Date
9/7/2018
File
BSR-2114/MAR
Document Number
921211401_09_002
Page
9 από 74
9
1.3.3
Event Indication LEDs
The Leds are separated in groups and are color coordinated. This helps us understand there functions easily.
In detail, the indications of the Leds correspond to the following instances:
Figure 1-3
Indication LEDs
1.
2.
Alarm [red]
The system is in an alarm status
3.
Power
[green]
General panel operation
indicator.
4.
General
[yellow]
Fault
In the event of a fault
5.
Disable
General disablement indicator
6.
Test
In the event of a test condition
7.
Faults
[yellow]
System
During a malfunction of the
panels pcbs
8.
Supply
In case of a power line failure
9.
Battery
During a problem with the
battery
10.
Fault – Disable
[yellow]
Zone
Blinks during a zone error. Stays
always on to indicate disabled
zones.
11.
Fire
routing
Blinks to indicate an alarm signal
error. Stays always o n to
indicate a disabled signal.
12.
Fault
routing
Blinks to indicate a fault signal
error. Stays always on to indicate
a disabled signal.
13.
Protection
fire
Blinks to indicate a extinguishing
signal error. Stays always on to
indicate a disabled signal.
14.
Siren
Blinks to indicate a siren error.
Stays always on to indicate
disabled sirens.
15.
[yellow]
Prealarm
Pre Alarm indicator.
16.
[red]
Fire
routing
Alarm system activation.
1.3.4
Zone indicators
The panel offers 96 - in
correspondence with the zones -
indicator LEDs which light in
case of an alarm.
Each LED corresponds to one
zone.
