Date
9/7/2018
File
BSR-2114/MAR
Document Number
921211401_09_002
Page
11 από 74
11
1.3.6
General LCD indications
The figure below shows the general indications of the panels LCD display.
Figure 1-4 LCD indications
While in the waiting screen, press the «ENTER» key to show the main menu on the top section of the screen.
The last line of the screen shows the date, time as well as the general state of the panel. The bottom section of the screen
shows some icons that show useful information about the panel’s status to the user of the panel. This information is:
«DAY MODE»
: This indication shows that all sensors have the day setting and not the night.
«FAULTS»
: This indication shows that there are faults in the system. (Pressing View Faults, shows the fault).
«PREALARMS»
: When this indication is shown then there are pre-alarms in the system.
«DELAYS ON»
: When a delay of an output is activated.
«PC»
: During this indication there is a communication between the panel and a PC.
«NET»
: During this indication the network protocol of the panel is active.
«LOOP» :
This indication is used to show that the loops are in operation.
«EX» :
This indication shows that the expansion protocol of the panel is active.
«AC1»
or
«AC2»
or
«AC3»:
This indication shows the access level state that we are in.
«DISABLEMENT»
: This indicator shows that there are disabled sections in the panel.
«PRN»
: This indication shows that there is a printer which is activated to print immediately.
«TEST»
: When the panel is in test condition.
«BUZZER SILENCE»
: This indicator shows that the buzzer has been silenced.
«SIREN SILENCE»
This indication shows that there are sirens that have been silenced (except for the sirens that have
been set differently (see. Siren parameters).