Date
9/7/2018
File
BSR-2114/MAR
Document Number
921211401_09_002
Page
70 από 74
70
This option clears the alarm counter. The alarm counter is a counter that counts the alarms and does not clear. The counter
clears only with this option.
To initialize the alarm counter you must be in access level 4. The access level is accessed when you are in access level 3 and
the dip switch 4 of SW1 is ON on BOARD I/O. Otherwise you can not initialize the counter.
5.6
Parameters menu
Using this option we can adjust various parameters of the panel such as :
PRINTER
: declare if we want the printer to print the events immediately.
PANEL NAME
: Set the panel name (up-to 32 characters).
TECHNICIANS INFO
: Set the technicians name (up to 32 characters).
DISABLE BUZZER
: Using this option we can disable the internal buzzer. Please note that this does not conform to
EN54-2 regulations.
CHANGE LANGUAGE
: Use this option to change the language as described in paragraph 2.2.1.
SCREEN BACKLIGHT
: Select if the screen backlight is always on or not. If we select the backlight to be always on
then the panels backup duration is degraded.
INDICATION OF PANEL
: Use this option to mark the panel as a LOCAL panel or a NETWORK PANEL
5.6.1
Network setup
The parameters of the network can be changed by this menu, a typical screen is shown below:
ΝΕΤ LOOP IF
SYSTEM READY
Figure 5-20 Network setup
