DISABLE
RELAY (1/64) 01
With the numeric keypad and the ‘ENTER’ key select a specific relay (e.g.
Relay 1) on the required BS-117 panel.
The Display shows.
x
1234567890123456
If ‘ENTER’ is pressed again, the selected relay is deactivated.
7.5 Activation
The fifth selection on the technicians menu is
If ‘ENTER’ is pressed we enter the activation submenu of the system. Through this
submenu we can activate the zones and the outputs of the system. The available selections
of the submenu are.
SELECT->ENTER
ENABLE ITEMS *
ENABLE
ALL SYSTEM
If ‘ENTER’ is pressed then all devices that were previously deactivated
are now activated.
ENABLE
ZONES OF PANEL 1
With the numeric keypad and the ‘ENTER’ key select the required
panel. The Display shows:
ENABLE
ZONE 01
With the numeric keypad and the ‘ENTER’ key select the required zone of
the panel. The Display shows:
All activated zones are marked with the ‘ ‘ symbol.
ENABLE
ALARM RELAY 1
With the numeric keypad and the ‘ENTER’ key select the required ALARM
relay. The Display shows:
And the relay is activated.
ALARM RELAY 1
IS ENABLED
ENABLE
FAULT RELAY 1
With the numeric keypad and the ‘ENTER’ key select the required FAULT
relay. The Display shows:
And the relay is activated.
FAULT RELAY 1
IS ENABLED
1234567890123456
1234567890123456
19
from
21
921116000
Date
File
Code
Page
921116000_09_016
13/03/2013
Summary of Contents for BS-116
Page 1: ......
