Olymp HairMaster HM600 I, User Instructions

Page: 49 / 191

2 Putting the Device into Operation
User Instructions HairMaster
®
| 751 250 / 09.2017 39
GB
2.3 Mounting the Device
1. Insert the column tube
3
into the hole in the star
base
5
and then push it up against the plastic
bearing
4
.
Shooting up of the telescopic tube!
The telescopic tube
1
is under spring
pressure.
When the fastening screw
2
is loosened,
the telescopic tube may shoot up and lead
to injury.
When loosening the fastening screw
2
,
keep a sufficiently safe distance from the
telescopic tube.
2. Fasten the column tube to the bottom of the star
base.
– Place the disk
8
on the column tube hole of
the star base,
– Using the hexagon socket wrench (Allen key)
6
, insert and fasten the screw
7
in the
column tube.
3. Insert the pivot of the dryer
9
into the telescopic
tube
1
.
4. To fasten the dryer in the telescopic tube:
– Insert the screw
d
through the drill hole
c
on the telescopic tube into the pivot and then
fasten the screw.
5. Insert the cable bracket
a
into the telescopic
tube. Insert the two ends of the cable bracket into
the drill holes
b
of the telescopic tube. The cable
bracket is fastened through internal tension; to
insert the cable bracket, push the two ends apart.