Olymp HairMaster HM600 I, User Instructions

Page: 60 / 191

4 Care and Maintenance
User Instructions HairMaster
®
| 751 250 / 09.2017 50
GB
4.1.2 Cleaning the Rollers and Bearings
When the rollers no longer run freely, clean the roller
sleeves and also the roller axles if required.
To dismount the rollers:
1. Place the roller lever
1
under the roller axle.
2. Next, remove the roller
2
from its sleeve
3
.
To mount the rollers:
3. Place the roller axle on the roller sleeve.
4. Push the roller into its sleeve.
5. Check whether the roller rotates freely.
4.2 Replacing the Filter
The filter prevents dirt particles being absorbed by the
fan.
The filter must be replaced:
• in case of visible heavy soiling,
• if the warning has been displayed,
• at least once a month.
1. The filter cover
5
is attached to the housing by
means of a clamp connection. To open the cover,
use the recessed grip
6
and lower the filter
cover.
2. Remove the filter
4
and insert a new filter into
the filter case.
3. To close the case, push the cover against it in
such a way that the clamp snaps in (make sure
that the power cable does not prevent the proper
closing of the filter case).