Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Parts (Step 85)
Regular Window Trim x 4
Narrow Window Trim x 8
Hardware (Step 85)
N1 -1 1/2” Finishing Nails
x 192 total
85.
Position
Window Trim
around window doing a dry run first and
attach with
4 - 1 1/2” Finishing Nails
per piece. There are two Trim Kits
(Regular/Narrow). The regular window kit = 1” x 24 1/16”=top (angle cut
on ends), 3” x 23” = Sides and Bottom. Narrow window kit = 1” x 19 7/8”
Top, 2” x 21 7/16” Sides, 1” x 18 3/4” Bottom. Window trim has a small
dado on reverse face. Outside flange of window will roughly sit in the
dado to give a better fit.
Trim dado
sits in flange.
Page 45
Thick butt of siding
Caulk
gap.
Caulk
gap.
Window
frame.
Siding Butt
Screw insert into
bottom (thick)
part of siding.
84.
To reduce possible water from penetrating
into the window cavity, caulk gap on both sides
of window opening prior to installing
Window
Insert.
Position insert in cavity and screw with
6 - 1 1/4” Screws
. On sides, make sure to
screw insert into the thick butt of the siding only.
Parts
Reg Window x 4
Narrow Window x 8
Hardware
S2
- 1 1/4” Screws
x 72 total
84b.
Once Insert is attached,
caulk the “triangular gap”
between the Insert’s outside
flange and the siding. Also put
a bead of caulking horizontally
at top of window where the
flange and siding meet. This
additional caulking will also will
reduce the chances of moisture
entering into your shed.
