49.
Position
Polygal Support Cleats
alongside
Rafters
. Leave a 1/4” gap down from top of
Rafter
. The
shorter Cleat is for the
Rafters
with a
Gusset
attached.
Secure each Cleat to
Rafter
with
4 - 1 1/4” screws
.
Ensure to pre-drill pilot holes to avoid splitting Complete
remaining
Polygal Support Cleats
.
Parts (Step 49)
Polygal Support Cleats Short
(3/4” x 3/4” x 38”)
x 4
Polygal Support Cleats Long
(3/4” x 3/4” x 48”
)
x 12
Hardware (Step 49)
S2
- 1 1/4” Screws
x 64
total
1/4” Gap
Important:
Pre drill pilot holes
to prevent splitting!
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 29
D. Roof Section
Polygal Panels (8)
Long Roof Panels (4)
2 Outside, 2 Center
Short Roof Panels (4)
2 Outside, 2 Center
