Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 30
50.
Identify Roof Panels. There are 4
Long Roof Panels
and 4
Short Roof Panels
. Start on the long side of roof (side without
polygal support cleats). Lift the long left panel onto roof such that
the roof plywood is 1/8” from end of roof rafter..
Parts (Step 50 - 54)
Long L&R Roof Panels
(5/8” x 48” x 81 1/2”)
x 2
Long Center Roof Panels
(5/8” x 45 1/2” x 81 1/2”
)
x 2
Hardware (Step 50 - 54)
S2
- 1 1/4” Screws
x 36
total
Roof Plywood 1/8”
from rafter end.
51.
Position Panel so roof plywood sits evenly on doubled up Rafters. Screw Panel to Rafters with
9 - 1 1/4” screws
. Lift up and place a
Long Center Roof Panel
on Rafters. Position evenly on Rafters.
45 1/2” wide
Center Roof Panel
Long Roof Panel
52.
Position
Center Roof Panel
so plywood is 1/8” from end of Rafters as per
Step 50
. From side-
to-side, make sure Roof Panel is sitting equally on rafters. When positioned correctly, screw down with
9 - 1 1/4” screws
into Rafters.