D. Roof Section
51.
Starting on the polygal side locate
Outside Roof Battens (3/4” thick x 3 1/2” wide x 48 1/4”
long)
and place
on roof rafters. Place at top of Rafter section where Rafter and Ridge Board meet.
Batten should be positioned evenly on 3rd rafter. Batten will overhang outside Rafter by 2 3/4”.
52.
Attach
Batten
to Rafters with
3 - 1 1/4” screws
per Rafter Section.
Important
: pre-drill with
1/8” drill bit first to prevent end from splitting. Place
Inside Roof Batten (45 1/2” long)
next to the
first and attach with
3 - 1 1/4” screws
.
Place
Outside Roof Batten
next to this inside batten and
attach with
3 - 1 1/4” screws.
Centered on 3rd
Rafter.
Metal Ridge Caps (3)
Foam Enclosures (Multiple Pieces)
Metal Roof Panels
Short (4)
Metal Roof Panels
Long (4)
Polygal Panels (6)
Roof Battens Inside
45 1/2” (8)
Roof Battens Outside
48 1/4” (16)
Batten Spacers Short
13 3/4” (4)
Batten Spacers Long
15 3/4” (8)
Batten flush with
top of Rafter
Overhangs outside
Rafter by 2 3/4”
Outside Batten
Outside Batten
Inside Batten
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 28