OLT SunShed Garden Shed SSGS1212-FJ-METAL Assembly Manual Download | Manualshive

Page: 1 / 45

background image

12x12 SunShed Garden Shed

with Metal Roof-FJ

Assembly Manual

Some of the safety and usage measures you may wish to consider include:

-snow load ratings vary by geographical location. If heavy or wet snowfall occurs, it is advisable to sweep the
snow off the roof(s).
-if the product is elevated, any structural and building code requirements are solely the customer's
responsibility, and should be abided by.
-in high or gusty wind conditions it is advisable to keep the structure securely grounded.
-have a regular maintenance plan to ensure screws, doors, windows and parts are tight.

Customer agrees to hold Outdoor Living Today free of any liability for improper installation,
maintenance and repair of any of our products.

Revision #1.3

July 23, 2021

Outdoor Living Today www.outdoorlivingtoday.com [email protected]

Page 1

Thank you for purchasing
an 12x12 SunShed Garden
Shed from Outdoor Living
Today. Please take the time
to identify all the parts prior
to assembly.

Safety Points and Other Considerations
Our products are built for use based on
proper installation and normal residential
use, on level ground. Please follow the
instruction manual when building your
shed and retain the manual for future
maintenance purposes.

In the event of a missing or broken piece, simply call the Outdoor Living Today Customer
Support Line @ 1-888-658-1658 within 30 days of the delivery of your purchase. It is our
commitment to you to courier replacement parts, free of charge, within 10 business days of
this notification. Replacement parts will not be provided free of charge after the 30 day grace
period.

STOCK CODE #

SSGS1212-FJ-METAL

1
2
3
...
»

Summary of Contents for SunShed Garden Shed SSGS1212-FJ-METAL














































Reviews:

No comments

Related manuals for SunShed Garden Shed SSGS1212-FJ-METAL

FRB28-2923-5FSC

Brand: Palmako Pages: 33

Brand: Oakville Pages: 45

Brand: Solid Pages: 32

Brand: Solid Pages: 32

Brand: Outdoor Life Products Pages: 24

Brand: Outdoor Life Products Pages: 26

Brand: Outdoor Life Group Pages: 25

Brand: Outdoor Life Group Pages: 33

41212MR-12 SAND

Brand: Gazebo penguin Pages: 31

Brand: Karibu Pages: 55

Brand: Palmako Pages: 155

Manhattan 1 ISO

Brand: Palmako Pages: 63

Brand: Valkea Pages: 19

Brand: Palmako Pages: 154

Brand: Universo Consumer Products Pages: 20

ELEGANTO TOP 5436

Brand: telluria Pages: 71

Brand: Big Lots Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands