Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 22
Space evenly
(approximately 5/8”)
Flush with siding bottom.
Parts
16D - Shelf Slats
(3/4” x 1 1/2” x 17 11/16”)
x 4
17D - Shelf Supports
(3/4” x 8” x 8 3/4”)
x 2
32.
Locate all four
Shelf Slats
and both
Shelf Supports
. Assemble shelf as shown,
attaching each slat with
1 - 1 1/4” Screw
per
end.
Hardware
S2 - 1 1/4” Screws
x 8 total
33.
Position completed
Shelf
on Front Wall panel above the food tray. The
shelf can be mounted higher or lower, but ensure the bottom of the shelf support
is aligned with the bottom ridge of a piece of wall siding, so that the attachment
screws will go through the thick end of bevel siding. Attach Shelf by angle
screwing into the Front Wall studs with
4 - 2 1/2” Screws
.
Hardware
S1 - 2 1/2” Screws
x 4 total
Pilot Hole
first.
