Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 11
C. Rafter and Roof Section
Exploded view of all parts necessary to complete the Rafter and Roof Section. Identify all parts
prior to starting.
23”
23”
Edge flush with
outside wall frame.
1” edge overhang inside.
Equal rafter overhang
front & back (2 3/4” approx.)
13.
Locate
Rafters
and position
one on top of side walls. Ensure
Rafter is oriented correctly with 2 1/2”
surface laying on wall frame and angle
cut ends sloped forward.
Mark the center point of the rafter (23” from
each end) and align with wall seam.
Hardware (Steps 13 - 14)
S1 - 2 1/2” Screws
x 8 total
Parts (Steps 13 - 14)
1C - Rafters
(1 1/2” x 2 1/2” x 46”)
x 3
2 1/2”
1 1/2”
Front Roof
Panel
Rear Roof Panel
Rafters (3)
Hinges (4)
