58.
Trim out rear corners with
remaining pieces of
Corner Trim
and
Wide Corner Trim
. Align and attach
with
8 - 1 1/2” Finishing Nails
per
piece as per
Step 56
.
Butt up tight to side of
Wide Corner Trim.
Align with top of
Wide Corner Trim.
59.
Attach
Horizontal Gable Trims
to both
sides of shed (2 per side). Position over
flashing where the gables and walls meet.
Orient thick end of Bevel downward. Butt
ends tight against Wide Corner Trims and
align tops together.
There may be a small gap between
Horizontal Gable Trims which will be
covered by a Detail Plate in
Step 65
. Attach
with
4 - 1 1/2” Finishing Nails
per piece.
Parts
Horizontal Gable Trims - Bevel
(3/4” x 4 1/2” x 32 3/4”)
x 4
Hardware
N1
- 1 1/2” Finishing Nails
x 16 total
Small gap.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 31
