70” Across
1 1/4” Screw
2” Screws
1 1/4” Screw
2” Screws
2” Screw
2” Screw
37.
Attach all Single and Double Rafter
Brackets where rafters meet Top Wall Plates
inside of shed. Attach with
2 - 1 1/4” Screws
and
2 - 2” Screws
per
Single Rafter
Bracket
and
6 - 2” Screws
per
Double
Rafter Bracket
.
Have two helpers hold the Front and Rear
Walls at the top from the outside of shed to
keep the inside-to-inside measurement
between the Top Plates at 70”.
Hardware
Y30
- Single Rafter Brackets
x 6 total
Y31
- Double Rafter Brackets
x 4 total
S2
- 1 1/4” Screws
x 12 total
S3
- 2” Screws
x 36 total
35.
Roof Gussets
are positioned on mid rafters. Have two helpers push the
Front and Rear Walls at the top from the outside of shed until inside to inside
measurement between the Top Plates is 70”. Slide Gusset up on side of Rafters.
Gusset must be below top edge of Rafter. Use level to square Gusset and attach
to Rafters with
4 - 2” Screws
. Pilot hole each Gusset end with 1/8” drill bit.
Parts (Steps 35 - 36)
Roof Gussets
(3/4” x 3 1/2” x 48”)
x 3
Hardware (Steps 35 - 36)
S3
- 2” Screws
x 12 total
36.
Complete remaining 2 Gussets
as per
Step 35.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 21
