47.
Once Metal Roof is spaced correctly from side-to-side and top-to-bottom, lift panels up and run
a bead of caulking down the overlapping seams of each panel to seal the joints. Place panels down
one by one once each seam is caulked. You will likely need a helper for this step. Caulk each seam.
Bead of caulking
Bead of caulking
48.
Using
6 - 2” Metal Screws
and
1/4” Nut Driver
(included), partially
secure
Metal Roof Panels
to middle row of
Battens
. Only fasten screws
halfway so that
Metal Roof Hangars
can be removed. Screw into center
of
Batten
and into peak of roof panels not valleys.
Important:
Metal
screws are self-taping, do not overtighten!
Hardware (Step 48 - 50)
2” Metal Roof Screws
x 24 total
Screw into center
of Battens
Important:
Metal Roof Hangars
will be removed in
Step 49
.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 25
