Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 14
28.
Locate Horizontal Wall Trims. Position up
against wall siding and below ceiling plywood.
Attach with
8 - 1 1/2” Finishing Nails
each.Complete front and rear with all 4 pieces.
Hardware
N1
- 1 1/2”
Finishing Nails
x 32 total
Parts
6C - Horizontal Wall Trims
(1/4” x 2” x 64 7/8”)
x 4
29.
Locate Vertical Wall Trims. Position over seams
in side walls on both sides of shed. Attach each piece
with
6 - 1 1/2” Finishing Nails
. Complete both front
and rear.
Hardware
N1
- 1 1/2”
Finishing Nails
x 12 total
Parts
4C - Vertical Wall Trims
(1/4” x 2” x 73 1/4”)
x 4
30.
Locate Gable Trims. Position against Gable Wall
siding and bottom of ceiling plywood. Trims will but up
against Rodge Trim and Horizontal Wall Trims. Attach
each piece with
6 - 1 1/2” Finishing Nails
. Complete
both sides of shed.
Hardware
N1
- 1 1/2”
Finishing Nails
x 24 total
Parts
7C - Gable Trims
(1/4” x 2” x 49 1/4”)
x 4
